Serving the Evansville area  ·  (930) 212-2629  ·  Open Mon-Sun 7am-7pm
📞 (930) 212-2629 Free Quote

Metal Roofing in Boonville, IN (47601) · Local Professionals

Evansville Metal Roofing · Fast response in Boonville and the Evansville area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+354Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Boonville sits just north of Evansville in Warrick County, where the housing stock shifts from 1900s brick bungalows near the square to farmhouses and machine sheds out along the corn and soybean fields. If your roof is showing its age, we install, repair, and replace metal roofing built for this exact climate.

Homeowners in Boonville (47601) call Evansville Metal Roofing because we know how hail, ice, and summer storms treat a roof here. From the older homes near the Warrick County Courthouse to the barns and grain bins off Highway 62, our team has seen what works and what fails.

Metal Roofing in Boonville (47601)

Boonville properties come with their own set of challenges. In town, lots are often tight, with mature oaks and sycamores hanging over roofs, and gutters that fill fast when spring storms roll through. Older homes near the square may have multiple roof layers or failing flashings that need attention before a metal roof goes on. Out in the county, barns and machine sheds sit on grade that shifts with freeze-thaw, and access can be tricky for equipment. We plan for all of it, from panel delivery to final cleanup.

Our crew is fully insured and a Metal Roofing Alliance Member, and we have worked across Warrick County and the Evansville area for years. We know which panel profiles hold up to hail and wind, and we know how to detail a roof so ice damming at the eaves is less likely.

Our services in Boonville

How a Job Works in Boonville

Step 1: You call us at (930) 212-2629, and we schedule a free on-site assessment. We look at your roof, your attic, and your gutters, and we talk through options and ballpark costs before any work begins.

Step 2: Once you approve the scope, we pull the needed permits through the local building department. If your home is in a historic district or under an HOA, we help coordinate design review so the panel profile and color meet the rules. Then our crew gets to work, protecting your landscaping and keeping the site tidy each day.

Step 3: We clean up thoroughly, haul away old materials, and walk the finished roof with you. We do not leave until you are satisfied and your property is clean.

Pricing in Boonville depends on the size and pitch of your roof, access, the condition of the existing decking, and how soon you need the work done. As a ballpark, metal roof installation starts around $8 per square foot, standing seam from $10, and replacement from $9. A retrofit over existing shingles starts at $7 per square foot. Repairs and leak fixes start at $450, screw replacement and re-fastening at $750, and flashing or chimney repair at $600. Coating and painting start at $2.50 per square foot. We give free estimates, so call (930) 212-2629 and we will give you a clear, written price for your Boonville property.

✅ Metal Roofing Alliance Member, licensed and insured for work in Boonville and nearby areas.

My barn off Highway 62 has corrugated panels that are rusting through at the fasteners. Can you match the existing profile?
Yes. We carry corrugated and ribbed panel profiles that match most older agricultural roofs. We will inspect the purlins and fasteners, replace any compromised panels, and re-fasten as needed. If the whole roof is failing, we can quote a full replacement with a heavier-gauge panel built for farm use.
A storm just peeled back panels on my roof near the Boonville square. How fast can you get out?
We offer free storm and wind damage inspections. Call (930) 212-2629 and we will schedule a visit as soon as possible. We can tarp or secure the roof to prevent further water damage, then provide a repair or replacement estimate and help document the damage for your insurance claim.
What does a typical metal roof replacement cost for a 1,500 square foot ranch in Boonville?
For a ranch that size, a basic metal roof replacement often falls in the range of $9 to $12 per square foot installed, depending on panel type, pitch, and whether any decking needs repair. That puts many jobs between $13,500 and $18,000. We provide a free estimate so you know the exact number for your home.
Do I need a permit to replace my roof in Boonville, and who handles it?
Roofing permits are commonly required for a full replacement in Boonville and Warrick County, though thresholds and fees vary. We handle the permit application and inspections as part of the job. You can also check with the City of Boonville through the Warrick County website for local rules: https://www.warrickcounty.gov.
My neighbor and I share a property line, and my new metal roof will overhang slightly. What are the rules?
Indiana code and local ordinances govern property line overhangs, and they can vary. We recommend confirming your setback with the local building department before work starts. If you are in an HOA, we can coordinate with your board on design approval. We will keep the installation within legal bounds and communicate with you about any concerns.
Are you fully insured for work at my Boonville home?
Yes. We carry general liability insurance and workers' compensation coverage for all crew members. We are happy to provide proof of insurance before we start any job in Boonville or the surrounding area.
What maintenance does a metal roof need in Boonville's climate?
In Boonville, the main issues are ice damming at the eaves and debris buildup from nearby trees. We recommend a yearly inspection, especially after winter, to check fasteners, seals, and gutters. Keeping gutters clear and addressing small leaks early will extend the life of your roof. We offer free estimates for inspections and maintenance.
Why choose us?

Trusted professionals in Evansville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Evansville

All your work handled by qualified professionals in Evansville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

354+ Verified Client Reviews in Evansville

⭐⭐⭐⭐⭐ 4.9/5 · 354 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Evansville · Response within 24h · No commitment · ☎ (930) 212-2629

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Evansville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm