Serving the Evansville area  ·  (930) 212-2629  ·  Open Mon-Sun 7am-7pm
📞 (930) 212-2629 Free Quote

Metal Roofing in Chandler, IN (47610) · Local Professionals

Evansville Metal Roofing · Fast response in Chandler and the Evansville area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+354Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Chandler, Indiana, sits just east of Evansville in Warrick County, where the lots are wide, the trees are tall, and most of the homes were built between the 1950s and the 1990s. You will see brick ranches along State Road 62, two-story traditional homes in subdivisions off Pollack Avenue, and a handful of older farmhouses out toward the county line. The housing stock here is solid, but the shingle roofs on these homes are reaching the end of their service life, and more homeowners are switching to metal for the long haul.

We are Evansville Metal Roofing, and we have been installing, repairing, and replacing metal roofs across Chandler and the 47610 ZIP code for years. Whether you are near Chandler Elementary or out on a rural route toward Yankeetown, we know how the weather and the trees here treat a roof. Call us at (930) 212-2629 for a free estimate.

Metal Roofing in Chandler (47610)

Chandler is mostly flat to gently rolling ground, but the soil here holds water after a heavy rain, and that matters for how we handle drainage and flashing. Many properties have mature oaks and maples close to the house, which means leaf debris in valleys and gutters, and the occasional fallen limb after a storm. The freeze-thaw cycles in winter and the spring hail we get in Warrick County are hard on asphalt shingles, causing granule loss and cracked mats. Metal handles that abuse far better, and it sheds snow and ice without the ice damming you see on older shingle roofs. We also deal with tight driveways and landscaping that require careful staging so we do not tear up your yard.

Our team has worked on everything from simple ranch homes to larger two-story houses and small agricultural buildings in the Chandler area. We know the local building department and what they look for on a final inspection.

Our services in Chandler

How a Job Works in Chandler

Step 1: You call us at (930) 212-2629 or request a free estimate online. We schedule a time to come out, inspect your current roof, take measurements, and talk through options like standing seam, corrugated panels, or a retrofit over your existing shingles. We give you a written estimate before any work begins.

Step 2: Once you approve, we pull the necessary permits through the local building department and schedule your crew. On installation day, we protect your landscaping, set up a safe staging area, and remove the old roofing or prepare the deck for the new metal. We keep you informed on progress and coordinate with any HOA requirements if your neighborhood has them.

Step 3: After the last panel is fastened and the flashing is sealed, we do a full cleanup, magnet sweep for nails, and a final walkthrough with you. We do not leave until you are satisfied and the site is clean.

Pricing for metal roofing in Chandler depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. As a ballpark, metal roof installation starts around $8 per square foot, standing seam runs from $10 per square foot, and a full replacement starts at $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot. Repairs and leak fixes start at $450, and screw replacement or re-fastening starts at $750. We also offer free inspections and estimates, so you know exactly what you are paying for before we start. Call (930) 212-2629 to schedule yours.

✅ Metal Roofing Alliance Member, licensed and insured for work in Chandler and nearby areas.

Do you work on homes in the older neighborhoods near Chandler Elementary and along State Road 62?
Yes, we work throughout Chandler and the surrounding Warrick County area. Homes near the school and along the main roads often have mature trees and smaller lots, so we plan staging carefully to protect landscaping and keep access clear. We have done many roofs in these neighborhoods and know the typical roof pitches and decking conditions.
How fast can you respond to storm damage in Chandler?
We offer free inspections and prioritize active leaks and storm damage. Call (930) 212-2629 and we will schedule an assessment as quickly as possible, usually within a day or two depending on demand after a storm. We can tarp or make temporary repairs to prevent further damage while you wait for a permanent fix.
What does a typical metal roof cost for a ranch home in Chandler?
For a standard ranch home, most metal roof installations fall between $8 and $12 per square foot depending on the panel type, roof complexity, and whether we are removing old shingles. A 1,500 square foot roof might run $12,000 to $18,000. We provide a free estimate with exact numbers for your property.
Do I need a permit for a metal roof in Chandler?
Yes, most roof replacements require a permit through the local building department. Requirements vary, so we recommend checking with the City of Chandler or Warrick County officials. You can find contact information on the City of Chandler website at https://www.warrickcounty.gov. We handle the permit application and inspections as part of our service.
What if my HOA has rules about metal roof colors or styles?
We can provide color samples and documentation to submit to your HOA for approval. Many associations in Chandler allow metal roofs but may restrict certain colors or panel profiles. We will coordinate with you and your HOA to make sure the installation meets their guidelines before we order materials.
Are you fully insured for work on my Chandler property?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews. We can provide a certificate of insurance upon request. This protects you and your property throughout the project.
How should I maintain my metal roof in Chandler's climate?
Inspect your roof and gutters twice a year, especially after spring storms and in the fall when leaves drop. Check fasteners and flashing for looseness or wear, and keep debris off the roof. We offer inspections and maintenance services to catch small issues before they become leaks.
Why choose us?

Trusted professionals in Evansville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Evansville

All your work handled by qualified professionals in Evansville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

354+ Verified Client Reviews in Evansville

⭐⭐⭐⭐⭐ 4.9/5 · 354 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Evansville · Response within 24h · No commitment · ☎ (930) 212-2629

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Evansville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm