Serving the Evansville area  ·  (930) 212-2629  ·  Open Mon-Sun 7am-7pm
📞 (930) 212-2629 Free Quote

Metal Roofing in Evansville, IN (47708) · Local Professionals

Evansville Metal Roofing · Fast response in Evansville and the Evansville area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+354Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Evansville's housing stock tells the story of the Ohio River bend: Riverside Victorians with steep slate-style pitches, Haynie's Corner shotguns with tight side yards, and east-side brick ranches that take a beating from spring hail. If your roof is showing its age, we install, repair, and replace metal roofing built for this exact climate.

We're Evansville Metal Roofing, based right here in 47708. From the historic district near the river to the newer subdivisions out in Newburgh and McCutchanville, our crews handle standing seam, copper, and corrugated panels. When the November 2005 tornado or the January 2009 ice storm comes up in conversation, most folks remember what wind and ice can do. We're here to make sure your roof holds up to the next one.

Metal Roofing in Evansville (47708)

Evansville sits on a sweeping bend of the Ohio River, and that geography drives the work. Riverside Drive and the historic district have Italianate and Queen Anne homes with complex rooflines, steep pitches, and decorative trim that demand careful flashing and panel layout. Over in Jacobsville and Lamasco, the 1900s brick bungalows and shotgun homes often have narrow lots and shared driveways, so staging materials takes planning. East and west side post-war ranches usually have simple gable roofs but wide spans that need proper fastening patterns to handle our spring wind gusts. Out in the county, farmhouses and barns across the bottomland need roofing that sheds ice and handles freeze-thaw without damming at the eaves.

Our team knows the local building stock and the weather that hits it. Hot humid summers, spring tornadoes and hail, ice storms, and moderate snowy winters with freeze-thaw cycles all work on a roof. We've seen failed fasteners, separated seams, and flashing gaps cause leaks on homes from Bayard Park to Darmstadt. We're fully insured with general liability and workers' compensation, and we're a Metal Roofing Alliance Member. We serve Evansville and the surrounding areas, including Warrick County and the north side.

Our services in Evansville

How a Job Works in Evansville

Step 1: You call us at (930) 212-2629 or request a free estimate online. We schedule an on-site assessment, walk the roof, check the attic if accessible, and look at flashing, fasteners, and seams. We'll talk through options, whether that's a repair, a retrofit over existing shingles, or a full replacement, and give you a written estimate.

Step 2: Once you approve, we handle permitting. Roofing permits are commonly required for a full replacement or re-roof in Evansville, and thresholds and inspection requirements vary by jurisdiction. We check with the local building department before we start, and if you're in a historic district or HOA, we help coordinate design review so the panel profile and color meet the rules. On tight lots in Jacobsville or Lamasco, we plan material delivery and staging to keep driveways clear. Our crews are licensed and insured, and we protect landscaping and siding as we work.

Step 3: When the job is done, we clean up thoroughly, haul away old materials, and walk the property with you. We check gutters, downspouts, and any penetrations, and we make sure you know what to expect from your new roof. We leave your property clean and your questions answered.

Pricing for metal roofing in Evansville depends on the job. For installation, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof installation starts at $8 per square foot, and standing seam starts at $10 per square foot. Replacement starts at $9 per square foot, and a retrofit over existing shingles starts at $7 per square foot. Repairs, including leak repair, start at $450, screw replacement and re-fastening starts at $750, and flashing, chimney, and skylight repair starts at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Key cost factors include roof size and pitch, access (tight lots and steep historic roofs cost more), the condition of the existing roof, and urgency. We give free estimates, so call (930) 212-2629 to get a realistic number for your home.

✅ Metal Roofing Alliance Member, licensed and insured for work in Evansville and nearby areas.

My Riverside Victorian has a steep, complex roof with original trim. Can you match a metal roof to that style?
Yes. We work on historic homes along Riverside Drive and in the Riverside Historic District regularly. We can recommend panel profiles and colors that suit Italianate and Queen Anne architecture, and we pay close attention to flashing and trim details. If the home is in a historic district, we help you understand design review requirements before ordering materials.
A storm just peeled back panels on my east-side ranch. How fast can you respond?
We offer free storm and wind damage inspections and prioritize active leaks and wind damage. Call (930) 212-2629 and we'll schedule an assessment as quickly as possible. We can often make temporary repairs to prevent further water intrusion while we prepare a permanent fix.
What does a typical metal roof replacement cost in Evansville?
Most replacements start at $9 per square foot, but the final number depends on roof size, pitch, access, and whether we're removing existing layers. A simple ranch is different from a steep Victorian with dormers. We provide a free written estimate so you can see the breakdown before you commit.
Do I need a permit for a metal roof in Evansville, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and requirements vary by jurisdiction. We check with the local building department and can pull the permit for you. The City of Evansville website at https://www.evansvillegov.org is a good starting point for general information, but we confirm the specifics with the department before work begins.
My HOA has rules about roof color, and my neighbor says the new panels will cross the property line. What should I do?
We help coordinate HOA design review and can provide product specifications and color samples for approval. For property lines, we recommend a survey if there's any question. We plan installations to stay within your property and follow local setback rules, and we're happy to discuss the layout with you before we order materials.
Are you insured for work on my Evansville property?
Yes. We are fully insured with general liability and workers' compensation coverage. We're happy to provide proof of insurance before work starts so you have peace of mind.
What maintenance does a metal roof need in Evansville's climate?
Our freeze-thaw cycles and ice storms can loosen fasteners and stress flashing over time. We recommend an annual inspection, especially after winter, to check fasteners, seams, and gutter condition. Keeping gutters clear and addressing small issues early prevents ice damming and leaks. We offer free inspections to help you stay ahead of problems.
Why choose us?

Trusted professionals in Evansville

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Evansville

All your work handled by qualified professionals in Evansville

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

354+ Verified Client Reviews in Evansville

⭐⭐⭐⭐⭐ 4.9/5 · 354 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Evansville · Response within 24h · No commitment · ☎ (930) 212-2629

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Evansville ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm